|
|
|
CONVAC
5 is an electronic instrument, allow to have to
access to 5 measurement parameters without requirement
of any additional equipment. Data are displayed in
a LCD alphanumeric back light screen (16 characters-1
line) CONVAC 5 is operated with a rechargeable
battery and controlled through a microcomputer.
The
five available functions are:
- FLOWMETER
-
VACUUMETER
-
TACOMETER
-
THERMOMETER
-
STOPWATCH
FLOWMETER: Maximum
measured capacity 6.050 litres/min. to 50 Kpa.
Three single levels for adjustment (50 litres
and 10 litres per minute). Tested against Master
Inst. GSO (0,2 % error) is a precise, reliable,
repetitive and useful instrument.(vacuum pumps,
milking machines testing) |
|
VACUUMETER:
To enable somebody to measure to 99,9 Kpa.
with piezoresistive integrated sensor. Display
in the screen the vacuum level simultaneosly with
the air flow measured or RPM value recorded. (milking
machines testing)
TACOMETER: Is
an encoder with an optical groove. To calculate
the RPM codifying the signal received and send
out to the microcomputer. Can be suitable to any
spindle.( vacuum pumps, milk pumps, electrics
engines, etc)
THERMOMETER: Graduated
to 120 °C, the stainless-steel rod is capable
for measurement in any liquid or gas. Reading
is displayed with tenth to 99,0 °C and without
tenth for higher values. (milk temperature, water,
air in vacuum pump exhaust)
STOPWATCH: Display
the time measurement from 1 second to 59 minutes
and 59 seconds. With single start trigger. (milking
routines measurement, etc) |
|
|
|
| |
 |
|
 |
|
|
|
